Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 763

IP 4 H A C
V ARDWARE CCESS ONTROL
- (
ACCESS LIST NUMBERED HARDWARE
613-50157-01 Rev C
L (ACL) C
IST OMMANDS
ACL ICMP)
FOR
Parameter Description
<ip-addr>
<reverse-mask>
<dest-ip>
The destination addresses to match against. You can specify a
single host, a subnet, or all destination addresses. The following
are the valid formats for specifying the destination:
any
host <ip-addr>
<ip-addr>/<prefix>
<ip-addr>
<reverse-mask>
icmp-type
The type of ICMP message to match against, as defined in RFC792
<number>
and RFC950. Values include:
0
3
4
5
8
11
12
13
14
15
16
17
18
vlan <1-4094>
The VLAN to match against. The ACL will match against the
specified ID in the packet's VLAN tag.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Match any source IP address within
the specified subnet. Specify the
subnet by entering a reverse mask in
dotted decimal format. For example,
entering "192.168.1.1 0.0.0.255" is the
same as entering 192.168.1.1/24.
Match any destination IP address.
Match a single destination host with
the IP address given by <ip-addr> in
dotted decimal notation.
Match any destination IP address
within the specified subnet. Specify
the subnet by entering the IPv4
address, then a forward slash, then
the prefix length.
Match any destination IP address
within the specified subnet. Specify
the subnet by entering a reverse
mask in dotted decimal format. For
example, entering "192.168.1.1
0.0.0.255" is the same as entering
192.168.1.1/24.
Echo replies.
Destination unreachable messages.
Source quench messages.
Redirect (change route) messages.
Echo requests.
Time exceeded messages.
Parameter problem messages.
Timestamp requests.
Timestamp replies.
Information requests.
Information replies.
Address mask requests.
Address mask replies.
763