Default Log Permanent - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

L C
OGGING OMMANDS

DEFAULT LOG PERMANENT

default log permanent
Overview This command restores the default settings for the permanent log stored in NVS.
By default, the size of the permanent log is 50 kB and it accepts messages with the
severity level of warnings and above.
default log permanent
Syntax
Default The permanent log is enabled by default.
Mode Global Configuration
Example To restore the permanent log to its default settings use the following commands:
awplus#
awplus(config)#
Related clear log permanent
Commands
log permanent
log permanent (filter)
log permanent exclude
log permanent size
show log config
show log permanent
613-50157-01 Rev C
configure terminal
default log permanent
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
251