Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 921

802.1X C
OMMANDS
1 -
DOT X PORT CONTROL
To disable port authentication on the interface port1.0.2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To enable port authentication on authentication profile 'student', use the
commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To enable port authentication force authorized on authentication profile 'student',
use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
force-authorized
To disable port authentication on authentication profile 'student', use the
commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
Validation show dot1x interface
Commands
Related aaa authentication dot1x
Commands
auth profile (Global Configuration)
613-50157-01 Rev C
configure terminal
interface port1.0.2
no dot1x port-control
configure terminal
auth profile student
configure terminal
auth profile student
configure terminal
auth profile student
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
dot1x port-control auto
dot1x port-control
no dot1x port-control
921