Show Test Cable-Diagnostics Tdr - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

P C C
LUGGABLES AND ABLING OMMANDS
-
SHOW TEST CABLE DIAGNOSTICS TDR

show test cable-diagnostics tdr

Overview Use this command to display the results of the last cable-diagnostics test that was
run using the TDR (Time Domain Reflectometer) on a fixed copper cable port.
The displayed status of the cable can be either:
•
•
•
•
•
show test cable-diagnostics tdr
Syntax
Mode Privileged Exec
Examples To show the results of a cable-diagnostics test use the following command:
awplus#
Output Figure 6-4:
Related clear test cable-diagnostics tdr
Commands
test cable-diagnostics tdr interface
613-50157-01 Rev C
OK
Open
Short (within-pair)
Short (across-pair)
Error
show test cable-diagnostics tdr
Example output from the show test cable-diagnostics tdr
command
Port Pair Length
------------------------------------------------- 
1.0.1 A -
B -
C -
D -
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Status 
OK 
OK 
OK 
OK
238