Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 827

IP 4 S A C
V OFTWARE CCESS ONTROL
- (
ACCESS LIST STANDARD NAMED
Usage Use this command when configuring a standard named access-list for filtering IP
software packets.
You can either create access-lists from within this command, or you can enter
access-list standard followed by only the name. Entering only the name moves
you to the IPv4 Standard ACL Configuration mode for the selected access-list. From
there you can configure your access-lists by using the command
standard named
NOTE
To define a standard access-list named my-list and deny any packets from any
Examples
source, use the commands:
awplus#
awplus(config)#
Alternatively, to define a standard access-list named my-list and enter the IPv4
Standard ACL Configuration mode to deny any packets from any source, use the
commands:
awplus#
awplus(config)#
awplus(config-ip-std-acl)#
Related (access-list standard named filter)
Commands
show running-config
show ip access-list
613-50157-01 Rev C
L (ACL) C
IST OMMANDS
)
filter).
: Software ACLs will deny access unless explicitly permitted by an ACL action.
configure terminal
access-list standard my-list deny any
configure terminal
access-list standard my-list
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
5 deny any
(access-list
827