Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 717

IGMP S C
NOOPING OMMANDS
IP IGMP SNOOPING TCN QUERY SOLICIT
See the
information about the Query Solicitation feature.
NOTE
supported when the device forms part of a VCS Stack.
Examples To enable Query Solicitation on a device, use the commands:
awplus#
awplus(config)#
To disable Query Solicitation on a device, use the commands:
awplus#
awplus(config)#
To enable Query Solicitation for vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable Query Solicitation for vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related show ip igmp interface
Commands
show running-config
613-50157-01 Rev C
Command
issued from Command issued
Global from Interface
Configuration Configuration
No Yes
Yes No
Yes Yes
IGMP Feature Overview and Configuration Guide
: This command will function on the switch in the stand-alone mode, but it is not
configure terminal
ip igmp snooping tcn query solicit
configure terminal
no ip igmp snooping tcn query solicit
configure terminal
interface vlan2
configure terminal
interface vlan2
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Device is STP Root
Bridge or the
EPSR Master Node
Yes
Yes
Yes
ip igmp snooping tcn query solicit
no ip igmp snooping tcn query solicit
IGMP Query Solicit
message sent on VLAN
Yes
No
Yes
for introductory
717