Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 807

IP 4 S A C
V OFTWARE CCESS ONTROL
- ( )
ACCESS LIST EXTENDED NAMED
Table 25-2: Parameters in the access-list extended (named) command - icmp
access-list extended <list-name> {deny|permit} {tcp|udp}
Syntax [tcp|udp]
<source> eq <sourceport> <destination> eq <destport> [log]
no access-list extended <list-name> {deny|permit} {tcp|udp}
<source> eq <sourceport> <destination> eq <destport> [log]
Table 25-3: Parameters in the access-list extended (named) command - tcp|udp
613-50157-01 Rev C
L (ACL) C
IST OMMANDS
Parameter Description
<type-number>
The ICMP type, as defined in RFC792 and RFC950. Specify one of
the following integers to create a filter for the ICMP message type:
0
3
4
5
8
11
12
13
14
15
16
17
18
log
Logs the results.
Parameter Description
<list-name>
A user-defined name for the access-list.
deny
The access-list rejects packets that match the type, source, and
destination filtering specified with this command.
permit
The access-list permits packets that match the type, source, and
destination filtering specified with this command.
tcp
The access-list matches only TCP packets.
udp
The access-list matches only UDP packets.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Echo replies.
Destination unreachable messages.
Source quench messages.
Redirect (change route) messages.
Echo requests.
Time exceeded messages.
Parameter problem messages.
Timestamp requests.
Timestamp replies.
Information requests.
Information replies.
Address mask requests.
Address mask replies.
807