Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 951

A C
UTHENTICATION OMMANDS
- -
AUTH DYNAMIC VLAN CREATION
To enable the Dynamic VLAN assignment feature with Web Authentication on
interface port1.0.2 when Web Authentication is needed, use the commands:
awplus#
awplus(config)#
awplus(config)#
1.2.3.4
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
To disable the Dynamic VLAN assignment feature on interface port1.0.2, use
the commands:
awplus#
awplus(config)#
awplus(config-if)#
To enable the Dynamic VLAN assignment feature on authentication profile
'student', use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To disable the Dynamic VLAN assignment feature on authentication profile
'student', use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
Validation show dot1x
Commands
show dot1x interface
show running-config
Related auth profile (Global Configuration)
Commands
auth host-mode
613-50157-01 Rev C
configure terminal
auth-web-server ipaddress 1.2.3.4
access-list hardware acl-web send-to-cpu ip any
interface port1.0.2
auth-web enable
auth dynamic-vlan-creation
access-group acl-web
interface vlan1
ip address 10.1.1.1/24
configure terminal
interface port1.0.2
no auth dynamic-vlan-creation
configure terminal
auth profile student
configure terminal
auth profile student
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
auth dynamic-vlan-creation
no auth dynamic-vlan-creation
951