Table of Contents
Advertisement
IGMP S
C
NOOPING
OMMANDS
SHOW IP IGMP SNOOPING STATISTICS
show ip igmp snooping statistics
Overview
Use this command to display IGMP Snooping statistics data.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip igmp snooping statistics interface <interface-range>
[group [<ip-address>]]
Mode
User Exec and Privileged Exec
Example
To display IGMP statistical information for vlan1 and vlan2, use the command:
awplus#
Output
Figure 22-6: Example output from the show ip igmp snooping statistics
613-50157-01 Rev C
Parameter
Description
<ip-address>
Optionally specify the address of the multicast group, entered in
the form A.B.C.D.
<interface>
Specify the name of the interface or interface range. If you
specify a port number, the output displays the number of
groups the port belongs to, and the port's group membership
limit, if a limit has been set (with the command
maximum-groups)
show ip igmp snooping statistics interface vlan1-vlan2
command for VLANs
awplus#show ip igmp interface vlan1-vlan2
IGMP Snooping statistics for vlan1
Interface:
port1.0.3
Group:
224.1.1.1
Uptime:
00:00:09
Group mode:
Exclude (Expires: 00:04:10)
Last reporter:
10.4.4.5
Source list is empty
IGMP Snooping statistics for vlan2
Interface:
port1.0.4
Group:
224.1.1.2
Uptime:
00:00:19
Group mode:
Exclude (Expires: 00:05:10)
Last reporter:
10.4.4.6
Source list is empty
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
"Getting Started
Guide.
ip igmp
729
Hide quick links:
Advertisement
Table of Contents
