Show Ecofriendly - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW ECOFRIENDLY

show ecofriendly
Overview This command displays the switch's eco-friendly configuration status. The
ecofriendly led
show ecofriendly
Syntax
Mode Privileged Exec and Global Configuration
Example To display the switch's eco-friendly configuration status, use the following
command:
awplus#
Output Figure 5-5:
Table 3: Parameters in the output of the show ecofriendly command
613-50157-01 Rev C
C
ONITORING OMMANDS
configuration status are shown in the
show ecofriendly
Example output from the show ecofriendly command
awplus#show ecofriendly 
Front panel port LEDs

Energy efficient ethernet
Port Name
port1.0.1 Port 1
port1.0.2
port1.0.3
port1.0.4 Port 4
port1.0.5
...
Parameter
normal
off
Port
Name
Configured
Status
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
show ecofriendly
normal
Configured Status
off -
off off
off -
off -
off -
Description
The eco-friendly LED feature is disabled and port LEDs
show the current state of the ports. This is the default
setting.
The eco-friendly LED feature is enabled and power to
the port LEDs is disabled.
Displays the port number as assigned by the switch.
Displays the port name if a name is configured for a
port number.
Because LPI is not supported, this entry always shows
"off" or a dash (-).
Because LPI is not supported, this entry always shows
"off" or a dash (-).
output.
202