Setting The Hmi Display; Setting The Date And Time - Siemens SINUMERIK 808D ADVANCED Diagnostic Manual

2.6

Setting the HMI display

2.6.1

Setting the date and time

At delivery, the system date and time remain at the factory settings, and thus you must
manually modify the date and time in the window as follows.
Operating sequence
Diagnostics Manual
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
1. Select the desired operating area on the PPU.
+
2. Open the date and time setting window through the following softkey
operations:
3. Enter the date and time in the specified format.
4. Press this softkey to confirm your settings.
→
Operating in the "SYSTEM" area
2.6 Setting the HMI display
29