Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 50

Operating in the "SYSTEM" area
2.11 Configuring the Ethernet connection
Creating and connecting a network drive
Proceed as follows to create and connect a network drive:
50
1. Share a directory on your local disk on your PC/PG.
2. Select the desired operating area on the PPU.
+
3. Press this key to view the extended softkeys.
4. Enter the network configuration window through the following softkey
operations:
5. Press this softkey to go to the window for configuring the network
drives.
6. Place the cursor on a free drive using the cursor keys.
7. Press this key to move the cursor to the following input fields:
Specify the three input fields as required:
①
• : The user name of your Windows account
②
• : The logon password (case sensitive) of your Windows
account
③
• : The IP address of the server and the share name of the
shared directory on your PC/PG
Example: //140.231.196.90/808D_T
8. Press this softkey to add the network drive.
You can delete a selected network drive using the following softkey:
Note that a network drive can be deleted only when it is
disconnected.
→ →
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
Diagnostics Manual