Action Log; Service Msg - Siemens SINUMERIK 808D ADVANCED Diagnostic Manual

2.10.1

Action log

Overview
The action log function is provided for service events. The contents of the action log file can
only be accessed through a system password on the HMI.
Viewing the action log
2.10.2

Service MSG

Overview
The service message function provides the possibility of sending message texts / messages
to a PG/PC via the RS232 interface and/or to a file to be saved internally on the control
system or externally on an USB stick.
Message texts / messages include:
•
Programmed messages from part program
•
Alarms
Diagnostics Manual
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
1. Select the desired operating area.
+
2. Press this key to view the extended softkeys.
3. Open the action log window through the following softkey operations:
4. The window opens displaying the action log for the service events.
5. You can press this softkey to set the filter conditions for the data to
be displayed.
6. To search for a specific event, press this softkey.
7. You can also save the action log on the CF card or on a USB
memory stick using this softkey.
→ →
Press this key to switch between displaying all data
and displaying a data group.
Press this key to select or deselect the displayed data.
Operating in the "SYSTEM" area
2.10 Viewing the service info
37