Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 417
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
61754
%[[channel %1: ] block %2: %]Tool radii must have same size for rough cutting
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Remedy:
- Check if tool radii have the same size in guide and following channel.
61755
%[[channel %1: ] block %2: %]Plate widths are different
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Remedy:
- Check if plate widths of recessing tools are the same size in guide and following channel.
61756
%[[Channel %1: ] Block %2: %]Multichannel machining not possible because of
collision of the tools.
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Multichannel machining with the programmed parameters would lead to a collision of the tools.
Remedy:
Adjust parameter (DCH offset) so that mutichannel machining is possible, or use single-channel machining.
61757
%[[Channel %1: ] Block %2: %]The finished part lies outside the specified grooving
limits.
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The finished part lies outside the specified grooving limits.
Remedy:
Check the position of the finished part contour in respect of grooving limits XDA and XDB
61758
%[[Channel %1: ] Block %2: %]Master spindle machine axes different in leading and
following channels.
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The machine axis references of the master spindle are different in the leading and following channels.
Remedy:
Check machine data 35000 $MA_SPIND_ASSIGN_TO_MACHAX, 30550
$MA_AXCONF_ASSIGN_MASTER_CHAN, 20090 $MC_SPIND_DEF_MASTER_SPIND and 20070
$MC_AXCONF_MACHAX_USED
61800
[Channel %1: ] Block %2: Ext. CNC system missing
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Machine data for external language MD18800: $MN_MM_EXTERN_LANGUAGE or option bit 19800
$ON_EXTERN_LANGUAGE is not set.
Remedy:
--
61801
[Channel %1: ] Block %2: Wrong G code selected
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
In the program call CYCLE300<value> an impermissible numerical value was programmed for the entered CNC
System, or in the Cycles Setting Datum an incorrect value for the G Code System was set.
Remedy:
--
Diagnostics Manual
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
SINUMERIK 808D ADVANCED alarms
3.5 Cycle alarms
417
Hide quick links:
Advertisement
Table of Contents
