Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 367
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
Remedy:
Swivel CYCLE800: Check transfer parameter _FR. Value range 0 to 8
61184
[Channel %1: ] Block %2: No solution possible with current input angle values
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The surface defined via the input angle cannot be processed with the machine.
Remedy:
-Check the angles entered for swiveling the machining plane: %4
-Parameter _MODE coding incorrect, e.g. rotation axis-wise YXY
61185
[Channel %1: ] Block %2: Invalid angular ranges of rotary axes in swivel data record:
%4
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The angular range of the rotary axes is invalid.
Check setup of the swivel CYCLE800.
Parameter $TC_CARR30[n] to $TC_CARR33[n] n number of swivel data record
Example: Rotary axis 1 modulo 360 degrees: -> $TC_CARR30[n]=0 $TC_CARR32[n]=360
Remedy:
Check setup of swivel cycle CYCLE800.
61186
[Channel %1: ] Block %2: Invalid rotary axis vectors --> Check setup of the swivel cycle
CYCLE800.
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
No or incorrect entry for rotary axis vector V1 or V2.
Remedy:
Check commissioning of swivel CYCLE800
Check rotary axis vector V1xyz: $TC_CARR7[n], $TC_CARR8[n], $TC_CARR9[n]
Check rotary axis vector V2xyz: $TC_CARR10[n], $TC_CARR11[n], $TC_CARR12[n]
If 2nd rotary axis not available ($TC_CARR35[n]=""), then it is possible that V2xyz=0
n Number of the swivel data set
61187
[Channel %1: ] Block %2: Check setup of the swivel cycle CYCLE800. - Error code: %4
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Remedy:
Error code: See current cycles software version notes in siemense.txt
61188
[Channel %1: ] Block %2: No axis name agreed for rotary axis 1 -> Check setup of the
swivel cycle CYCLE800.
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
No axis name was specified for the rotary axis 1.
Remedy:
Check setup of swivel CYCLE800.
Axis name of rotary axis 1 see parameter $TC_CARR35[n] n number of swivel data record
61189
[Channel %1: ] Block %2: Swivel direct: Invalid rotary axis positions: %4
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Swivel direct: Check input values of rotary axes.
Diagnostics Manual
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
SINUMERIK 808D ADVANCED alarms
3.5 Cycle alarms
367
Hide quick links:
Advertisement
Table of Contents
