Loading Externally Backed-Up Data - Siemens SINUMERIK 808D ADVANCED Diagnostic Manual

Data backup
6.3 External data backup
Operating sequence:
6.3.6

Loading externally backed-up data

Restoring a start-up archive
462
1. Select the desired operating area on the PPU.
+
2. Navigate to the NC file that you desire to back up, and copy it to the
buffer memory on the control system with this softkey.
3. Press this softkey to view the network drive(s) created.
4. Enter the desired network drive with this key.
5. Press this softkey to paste the copied file into the current directory.
After the file is successfully pasted, you can find it in the
corresponding directory on your PC.
1. Select the desired operating area.
+
2. Press this softkey to open the start-up archive window.
3. Select a desired option to restore the start-up archive and press this
softkey.
Note that the option
archive in the default directory.
If you use the option
and find the backup archive.
4. Press this softkey to confirm the archive information.
5. Press this softkey to continue and start restoring the start-up archive.
The control system restarts to complete restoring the archive.
②
appears only after you have created an
①
, you also need to select the backup path
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
Diagnostics Manual