Proceed through the following steps to activate the options:
Reference
SINUMERIK 808D ADVANCED Function Manual
SINUMERIK 808D ADVANCED Commissioning Manual
Diagnostics Manual
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
1.
Press this softkey to open the window of available options. You can find
the licensing status in this window, for example:
If you have licensed one or two additional axes, you can find a figure of
"1" or "2" in the column of licensing status. For other licensed options, a
" ☑ " symbol displays in this column.
2.
Set the licensed options.
•
For the additional axes, enter "1" or "2" in the setting column and
press the following key:
•
For the other options, press the following key to select:
3.
Press this softkey to restart the NCK, so that the licensed options are
activated.
Operating in the "SYSTEM" area
2.10 Viewing the service info
45