Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 386
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
SINUMERIK 808D ADVANCED alarms
3.5 Cycle alarms
61321
[Channel %1: ] Block %2: Check WO memory number
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Remedy:
For 840D sl - up to SW 2.6 SP1 and for 828D - up to SW 4.3:
- Check parameter _KNUM
For 840D sl - as from SW 2.7 and for 828D - as from SW 4.4:
- Check the the number entered for the work offset compensation
61322
[Channel %1: ] Block %2: Check 4th digit of _KNUM
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The stated digit of _KNUM includes invalid values. Also check _MVAR.
Remedy:
For 840D sl - up to SW 2.6 SP1 and for 828D - up to SW 4.3:
Check parameter for tool offset target (_KNUM) and/or measurement variant (_MVAR)
61323
[Channel %1: ] Block %2: Check 5th digit of _KNUM
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The stated digit of _KNUM includes invalid values. Also check _MVAR.
Remedy:
For 840D sl - up to SW 2.6 SP1 and for 828D - up to SW 4.3:
Check parameter for tool offset target (_KNUM) and/or measurement variant (_MVAR)
61324
[Channel %1: ] Block %2: Check 6th digit of _KNUM
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The stated digit of _KNUM includes invalid values. Also check _MVAR.
Remedy:
For 840D sl - up to SW 2.6 SP1 and for 828D - up to SW 4.3:
Check parameter for tool offset target (_KNUM) and/or measurement variant (_MVAR)
61325
[Channel %1: ] Block %2: Check measuring axis/offset axis
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Remedy:
For 840D sl - up to SW 2.6 SP1 and for 828D - up to SW 4.3:
- Check parameters for measuring axis _MA
For 840D sl - as from SW 2.7 and for 828D - as from SW 4.4:
- Check parameters for measuring axis (X, Y, Z)
61326
[Channel %1: ] Block %2: Check measuring direction
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Remedy:
For 840D sl - to SW 2.6 SP1 and for 828D - to SW 4.3 :
- Milling measuring cycles:
- Parameter for the measuring direction (_MD) has an incorrect value.
For 840D sl - from SW 2.7 and for 828D - from SW 4.4 :
- Milling measuring cycles:
- Check the measuring direction (+ -) entered in the screen form.
For 840D sl and for 828D - from SW 4.6 :
- Milling measuring cycles:
- Check the measuring direction (+ -) entered in the screen form.
- Turning measuring cycles:
386
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
Diagnostics Manual
Hide quick links:
Advertisement
Table of Contents
