Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 459

Diagnostics Manual
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
4. Use this key to set the values in the following window as required:
5. Press this softkey to save your settings. If desired, you can press the
following softkey to reset the settings to defaults:
6. Return to the RS232 main screen.
7. Open the SinuComPCIN on your PC/PG.
8. Press this button on the main screen and then select the desired
baudrate from the list. Note that this baudrate must be the same as
that you have selected on the NC side.
9. Save the settings with this button.
10. Return to the main screen of SinuComPCIN.
11. Press this button and input the name for the text file. For example,
test.txt:
12. Select an NC file (take the user cycle CYCLE999.SPF for an
example) and copy it with this softkey.
13. Switch to the RS232 screen with this softkey.
14. Press this vertical softkey in the RS232 window. The file transferring
starts.
Data backup
6.3 External data backup
459