Setting axis-specific machine data
Diagnostics Manual
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
1.
Select the desired operating area.
+
2.
Enter the window of axis-specific machine data through the following
softkey operations:
3.
Locate the machine data which you desire to set.
You can also search for an MD using the following softkeys:
4.
Enter the desired value in the blank and press this key to confirm.
5.
Press this softkey to activate the modified value(s) after you finish
setting the machine data.
Further softkey operations are available for setting the axis-specific
machine data:
→
→
Searches for the desired number or the name (or a
part of the name) of the machine data
Continues searching for the next match
Switches to the next axis
Switches to the previous axis
Resets the value of the selected MD to default
Undoes the modified values and recalls the lastly used
values
Provides various display filters for the active machine
data group
Operating in the "SYSTEM" area
2.3 Setting system machine data
17