Configuring LOGO!
7.2 Setting the default values for LOGO!
To set the time of day and the date in programming mode:
If you want to set the time of day and the date in programming mode, select 'Setup' in the
main menu, then menus 'Clock' and 'Set Clock'. You can now set the weekday and the time
as described earlier (as of step 8.).
7.2.2
Setting the display contrast and backlight choice
You can set the default value for the display contrast
● in parameter assignment mode by means of the set menu "LCD" menu item)
● in programming mode by means of the setup menu ("LCD" menu item).
To set the display contrast in parameter assignment mode:
1. Select parameter assignment mode (Page 288).
2. On the parameter assignment menu,
3. Confirm 'Set..': Press OK
4. On the Set menu, select 'LCD': Press
5. Confirm 'LCD..': Press OK
6. By default, the cursor points to Contrast.
7. Confirm 'Contrast': Press OK
8. To change the display contrast: Press
9. To confirm your entry: Press OK
To set the display contrast in programming mode:
If you want to set the display contrast in programming mode, select 'Setup' in the main
menu, then menu 'Contrast'. You can now set the display contrast as described earlier (as of
step 8.).
296
select 'Set': Press
or
If not, move the '>' cursor to 'Contrast': Press
LOGO! shows the following display:
or
or
or
Manual, 04/2011, A5E03556174-01
LOGO!