Viewing The Service Info - Siemens SINUMERIK 808D ADVANCED Diagnostic Manual

Operating in the "SYSTEM" area

2.10 Viewing the service info

2.10 Viewing the service info
You can view the service information through the following operations:
①
②
36
+ → →
Displays information of the axes. The
following two softkeys can be used to
display the values for the next or
previous axis:
Displays information of the drives. The
following two softkeys can be used to
display the values for the next or
previous drive:
Views the optimization results of the previous axis
Returns to the main screen of drive optimization. In this
case, you may optimize the drive again with either new
measurements or last measurement results.
③
Displays the action log for service
events, provides the possibility of
sending service messages, and
configures the Ethernet connection
④
Compares the defined machine data
with the actual data, and adjust the
parameters if necessary. Refer to
Section "Servo trace (Page 40)" for
more information.
⑤
Displays the version numbers and the
date of creation of the individual CNC
components. Refer to Section "Version/
HMI details (Page 42)" for more
information.
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
Diagnostics Manual