Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 44

Operating in the "SYSTEM" area
2.10 Viewing the service info
Entering a license key
To enter the license key, follow these steps:
Activating the options
The following optional functions can be purchased for the SINUMERIK 808D ADVANCED
control system.
•
Additional axes
•
Bidirectional leadscrew error compensation
•
Manual Machine Plus (for turning variant only)
•
Transmit/Tracyl
•
Gantry (BASIC)
To use a purchased option, you must first activate it with a license key on the control system.
Note
The control system supports up to two additional axes for the turning variant and one for the
milling variant.
After you purchase the desired option(s), you can obtain the corresponding license key from
the Web License Manager.
For more information about how to generate a license key via the Web License Manager,
refer to the SINUMERIK 808D ADVANCED Function Manual.
44
1. Press this softkey to open the dialog for entering the license key
2. Enter the license key in the following dialog:
3. Press this softkey to confirm.
Diagnostics Manual, 08/2013, 6FC5398-6DP10-0BA1
Diagnostics Manual