Scan Mode Controls - GE TiP LOGIQ 400 Quick Start Manual

Scan Mode Controls

Select the desired display mode or combination of display modes (B-Mode, Pulsed Doppler, Color
Flow Mode, M-Mode or Continuous Wave Doppler Mode).
To select CWD Mode, press Blue Shift and X. CWD Mode is available for sector probe only.
If the dual display mode (split screen) is desired, the L and R keys activate the Left or Right
displayed image.
Scan the desired anatomy. Change modes as desired. Use the mode controls to adjust the image
as necessary.
t
LOGIQ 400 Quick Start Guide
2237879–100 Rev. 0
All manuals and user guides at all-guides.com
Quick Start 11