Small Backup (Scan Settings); Saving A Small Backup; Loading A Small Backup - GE Voluson Swift Instructions For Use Manual

System Setup

Small Backup (Scan Settings)

Saving a Small Backup:

Loading a Small Backup:

11-40
Figure 11-24 System Configuration
System Configuration can be saved to the following destinations:
The
•
D partition of internal hard disk
•
Mapped Network Drive Z
•
Any other drive connected to the system (e.g.; an external USB-hard disk)
Do not disconnect an external USB - device without stopping it. Disconnecting without
stopping can lead to data loss on the external device.
The Small Backup contains:
•
Image settings
•
Auto Text
•
Setup settings (language, date format, screensaver on/off, etc.)
Save and the Save window is displayed.
1. Click
2. Choose the medium and click
3. Select an already existing file or click on
OK and saving procedure begins. Click Cancel to exit without saving.
4. Click
Load and the Load window is displayed.
1. Click
2. Choose the medium and click
3. Select the appropriate file and click
4. Select the appropriate "Backup Data".
Save .
New File to create a new Backup.
Load .
OK . The Load option window appears.
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4