Adjustment Of Printer Settings - GE Voluson P6 Service Manual

GE H RAFT
EALTHCARE
DIRECTION 5459672-100, R
3-7-5

Adjustment of Printer Settings

1.) After system restart, press the F2 key on the control panel.
2.) In the "Utilities" menu select SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select CONNECTIVITY and then click on the
4.) Select the desired printer from the Printer Settings pull-down menu and click the EDIT button.
5.) Confirm the warning message with the YES button. The "Printer Properties" appear.
To adjust the UP-D897 printer see:
To adjust the P95D printer see:
To adjust the UP-D25MD Printer see:
WARNING WARNING After each printer installation, the leakage currents have to be measured
acc. IEC 60601-1 resp. UL 60601-1.
!! WARNING:
3-46
6 DRAFT (J
EVISION
Figure 3-47 Select the desired printer
Section 3-7-5-1 "UP-D897 - Printer Settings"
Section 3-7-5-2 "P95D - Printer Settings"
Section 3-7 - Printer Installation
17, 2013)
ANUARY
Section 3-7-5-3 "UP-D25MD - Printer Settings"
V ® P8 / V
OLUSON OLUSON
P S M
ROPRIETARY ERVICE
PERIPHERALS tab.
select the desired printer
from the pull-down menu
.
.
.
® P6
ANUAL