Ntp Commands; Introduction; Chapter 40: Ntp Commands - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

40

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
the Network Time Protocol (NTP). For more information, see the
Overview and_Configuration
The device can act as an NTP client to receive time from one or more NTP servers,
and as an NTP server.
For information on filtering and saving command output, see the
with AlliedWare_Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50157-01 Rev C

NTP Commands

"ntp access-group (deprecated)" on page 1504
"ntp authenticate" on page 1505
"ntp authentication-key" on page 1506
"ntp broadcastdelay" on page 1507
"ntp discard" on page 1508
"ntp master" on page 1509
"ntp peer" on page 1510
"ntp restrict" on page 1512
"ntp server" on page 1514
"ntp source" on page 1516
"ntp trusted-key (deprecated)" on page 1518
"show counter ntp (deprecated)" on page 1519
"show ntp associations" on page 1520
"show ntp counters" on page 1522
"show ntp counters associations" on page 1524
"show ntp status" on page 1526
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Guide.
NTP Feature
"Getting Started
Guide.
1503