Show Interfaces Description - Cisco 300 Series Cli Manual

Ethernet Configuration Commands
OL-32830-01 Command Line Interface Reference Guide

18.21 show interfaces description

To display the description for all configured interfaces or for a specific interface,
use the show interfaces description Privileged EXEC mode command.
Syntax
show interfaces description
Parameters
•
interface-id—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
•
detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
Display description for all interfaces. If detailed is not used, only present ports are
displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the description of all configured interfaces.
switchxxxxxx# show interfaces description
Port Descriptions
----- ---------------------------------------------
Port that should be used for management only
gi1 1
2
gi1
gi1 3
4
gi1
PO Description
---- -----------
Po1 Output
[interface-id | detailed
]
18
408