Event Manager Policy; Event Manager Environment - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

event manager environment

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
event manager environment
To configure an EEM environment variable, use the event manager environment command. To disable
an EEM environment variable, use the no form of the command.
Syntax Description
variable-name
variable-value
Defaults None.
Command Modes
Embeded Event Manager.
Command History Release
NX-OS 4.1(3)
Usage Guidelines None.
Examples The following example shows how to set an EEM environment variable:
switch# configure terminal
switch(config)# event manager environment emailto "admin@anyplace.com"
switch(config)#
Related Commands Command
show event manager
policy
show event manager
environment
Cisco MDS 9000 Family Command Reference
7-16
event manager environment variable-name variable-value
no event manager environment variable-name variable-value
Specifies the name of the EEM environment variable. The variable name
can be any case-sensitive alphanumeric string up to 32 characters.
Specifies the value of the EEM environment. The variable name can be any
case-sensitive alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Displays the register Embedded Event manager policies.
Displays the name and value of the Embedded Event manager.
Chapter 7 E Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x