Debug Ilpower Event - Cisco Catalyst 3550 Command Reference Manual

debug ilpower event

debug ilpower event
Use the debug ilpower event privileged EXEC command to enable debugging of the platform-specific
inline-power software module in a short message format. These messages display the inline-power state
and events received. Use the no form of this command to disable debugging output.
This command is available only on the Catalyst 3550-24PWR switch.
Syntax Description
This command has no keywords or arguments.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EA1
Usage Guidelines
The undebug ilpower event command is the same as the no debug ilpower event.
Related Commands Command
debug ilpower controller
Catalyst 3550 Multilayer Switch Command Reference
B-14
debug ilpower event
no debug ilpower event
Modification
This command was first introduced.
Description
Enables debugging of the platform-specific inline-power software module
in long message format.
Appendix B Debug Commands
78-11195-09