Dscp - Cisco Catalyst 3650 series Command Reference Manual
Cisco ios xe everest 16.5.1a
Hide thumbs
Also See for Catalyst 3650 series:
- Hardware installation manual (126 pages) ,
- Configuration manual (94 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
dscp
To configure a differentiated services code point (DSCP) value for flow exporter datagrams, use the dscp
command in flow exporter configuration mode. To remove a DSCP value for flow exporter datagrams, use
the no form of this command.
dscp dscp
no dscp dscp
Syntax Description
dscp
Command Default
The differentiated services code point (DSCP) value is 0.
Command Modes
Flow exporter configuration
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
To return this command to its default setting, use the no dscp or default dscp flow exporter configuration
command.
Examples
The following example sets 22 as the value of the DSCP field in exported datagrams:
Device(config)# flow exporter FLOW-EXPORTER-1
Device(config-flow-exporter)# dscp 22
DSCP to be used in the DSCP field in exported datagrams. The range is 0 to 63. The
default is 0.
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
dscp
427
Advertisement
Table of Contents
