Configuring Online Diagnostics; Setting The Bootup Diagnostic Level - Cisco Nexus 9000 Series Configuration Manual

Configuring Online Diagnostics

Configuring Online Diagnostics
Be aware that the Cisco NX-OS commands for this feature may differ from those commands used in Cisco
Note
IOS.

Setting the Bootup Diagnostic Level

You can configure the bootup diagnostics to run the complete set of tests, or you can bypass all bootup
diagnostic tests for a faster module bootup time.
Note We recommend that you set the bootup online diagnostics level to complete. We do not recommend
bypassing the bootup online diagnostics.
Procedure
Step 1
Step 2
Step 3
Step 4
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 6.x
152
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
diagnostic bootup level {complete | bypass}
Example:
switch(config)# diagnostic bootup
level complete
show diagnostic bootup level
Example:
switch(config)# show diagnostic bootup
level
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Configuring Online Diagnostics
Purpose
Enters global configuration mode.
Configures the bootup diagnostic level to trigger
diagnostics as follows when the device boots:
• complete—Perform all bootup diagnostics.
The default is complete.
• bypass—Do not perform any bootup
diagnostics.
(Optional)
Displays the bootup diagnostic level (bypass or
complete) that is currently in place on the device.
(Optional)
Copies the running configuration to the startup
configuration.