11. COMMUNICATION INTERFACE
SETTING
(COMMUNICATION SETTING)
The [Communication Setting] menu has the [Standard I/F], [Data Transfer], [Communication Monitor], and
[Keyword] menus.
The [Standard I/F] menu sets the information about the channel numbers, controller name, and detailed
settings of the communication parameters that are allocated to the communication interfaces by drawing
software.
The [Data Transfer] menu displays the screen for transferring project data between the PC and GOT.
The [Communication Monitor] menu displays the communication status of each communication port.
The [Keyword] menu registers, deletes, clears, and protects a keyword of the FX series PLC.
11.1 Standard I/F Setting
11.1.1 Standard I/F functions
Function
Channel no. display
Communication driver display
Communication parameters display
11.1.2 Standard I/F display operation
Main Menu
Displays the channel number (CH No) that has been assigned by drawing
software
Displays the communication driver that has been assigned by drawing software
Displays the communication parameters of the controllers that has been
assigned by drawing software
Touch [Comm. Setting].
Contents
Touch [Standard I/F].
Standard I/F
11.1 Standard I/F Setting
11.1.1 Standard I/F functions
9
10
11
12
13
14
15
16
11 - 1