System Bios; Starting Setup; Parameter Descriptions - NEC Express5800 Series Maintenance Manual

Chapter 2 Useful Features
1.

System BIOS

You can check and change the parameters using the BIOS Setup utility (SETUP).
1.1

Starting SETUP

Turn on the server and proceed with POST.
After a while, the following message appears at the bottom left of the screen.
Press <F2> SETUP, ... (* a different message may appear depending on your environment)
If you press <F2>, SETUP will start after POST, and the Main menu appears. (You can also start SETUP by
pressing <F2> key while expanding option ROM.)
1.2

Parameter Descriptions

The SETUP utility has the following six major menus.
• Main menu
• Advanced menu
• Security menu
• Server menu
• Boot menu
• Save & Exit menu
These menus have submenus for relevant items. Selecting submenus allows you to configure further detailed
parameters.
54
Express5800/E120e-M Maintenance Guide
1. System BIOS