Viewing Idas Data And Settings - Teledyne 200E Instruction Manual

Model 200E Instruction Manual
The default data channels can be used as they are, or they can be customized from the
front panel or through APICOM to fit a specific application. The T-API website contains this
default and other sample iDAS scripts for free download. We recommend that the user
backs up any iDAS configuration and its data before altering it.
Appendix A-5 lists the firmware-specific iDAS configuration in plain-text format. This text
file can either be loaded into APICOM and then modified and uploaded to the instrument or
can be copied and pasted into a terminal program to be sent to the analyzer.
Sending an iDAS configuration to the analyzer through its COM ports will replace
the existing configuration and will delete all stored data. Back up any existing
data and the iDAS configuration before uploading new settings.

6.10.2.2. Viewing iDAS Data and Settings

IDAS data and settings can be viewed on the front panel through the following keystroke
sequence.
EXIT will return to the
main SAMPLE Display.
044100102 Rev A
WARNING
SAMPLE RANGE = 500.0 PPB
< TST TST > CAL
PRIMARY SETUP MENU
SETUP X.X
CFG DAS RNGE PASS CLK MORE
SETUP X.X DATA ACQUISITION
VIEW EDIT
SETUP X.X : DATA AVAILABLE
CONC
NEXT VIEW
SETUP X.X ENGDAT: DATA AVAILABLE
PREV
NEXT VIEW
SETUP X.X CALDAT: DATA AVAILABLE
PREV VIEW
NOX=X.X
SETUP
KEY
<PRM
PRM>
EXIT
NX10
NEXT
PREV
EXIT
PV10
Keys only appear as needed
EXIT
SETUP X.X 00:00:00 NXCNC1=0.0 PPM
NEXT NX10 <PRM
PV10 PREV
EXIT
SETUP X.X 00:00:00 SMPFLW=000.0 cc / m
<PRM
EXIT
SETUP X.X 00:00:00 NXSLP1=0.000
<PRM
PV10 PREV
Operating Instructions
VIEW KEYPAD FUNCTIONS
FUNCTION
Moves to the next Parameter
Moves to the previous
Parameter
Moves the view forward 10
data points/channels
Moves to the next data
point/channel
Moves to the previous data
point/channel
Moves the view back 10 data
points/channels
EXIT
PRM>
PRM> EXIT
EXIT
PRM>
91