Hardware Setup; Mcdp Setup; Arinc 615 Portable Data Loader Setup; Loadstar Setup For B777 Pmat - Teledyne PMAT 2000 User Manual

• Initializes the internal Operating System (Microsoft
checks all interfaces;
• Loads the PMAT 2000 Main Menu (see Figure 4 for an example).
2.2

Hardware Setup

The aircraft manufacturer's Airplane Maintenance Manual procedures
NOTE:
must be used for on-airplane software uploading and downloading to
ensure the correct and specific maintenance procedures are followed.
The following sections describe generic information for connecting the PMAT 2000 to
some aircraft systems prior to operation. Other hardware setup procedures may be
different depending on airplane manufacturer, airplane model, and avionics equipment
manufacturer.
2.2.1

MCDP Setup

• Connect one end of cable, P/N 80031, labeled "PMAT" to the connector on the
top of the PMAT 2000 (Figure 2).
• Connect the other end of the cable labeled "MCDP REMOTE" to the MCDP
Remote Panel receptacle in the flight deck.
• For more information on how to use the MCDP software, see Section 2.4.
2.2.2

ARINC 615 Portable Data Loader Setup

Note: For 615 Portable Data Loader operation, the PMAT 2000 is powered by its
batteries or by the AC power cable, P/N
• Connect one end of cable, P/N 80030, labeled "PMAT 2000" to the connector on
the top of the PMAT 2000 (Figure 2).
• Connect the other end of the cable labeled "ARINC 615 Computer" to the ARINC
615 device.
• For more information on how to use the ARINC 615 software, see Section 2.5.
2.2.3

LoadStar Setup for B777 PMAT

Note: Reference LoadStar User's Guide (P/N 59721) for complete details of the
interface between the PMAT 2000 and PMAT. The PMAT used in this
document is referring to both the PMAT/MSD (50000-002) and PMAT/NT
(50000-004) model because both PMAT models have a Mass Storage
Device (MSD).
• Connect one end of the Y-Cable PMAT 2000-PMAT Interface Ethernet cable,
P/N 80034, labeled "PMAT" to the PMAT.
• Connect the other end of the Y-Cable labeled "PMAT 2000" to the PMAT 2000.
• Connect the end of the Y-Cable labeled "Aircraft Power" to the PMAT connector
in the 777 EE Bay.
80010 Revision J
®
Windows XP by default) and
80044-2.
January 18, 2011
PMAT 2000®
User Guide
Page 8