Dhcp Server Option - H3C s3100 series Command Manual

Use the undo dhcp server netbios-type command to restore the default NetBIOS node type.
By default, no NetBIOS node type is specified. After the WINS server IP address is configured for the
client in the DHCP interface address pool, the client uses the hybrid node (h-node).
Related commands: netbios-type, dhcp server nbns-list.
Examples
# Enter system view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
# Specify p-node as the NetBIOS node type of the DHCP clients whose IP addresses are from the
DHCP interface address pool of VLAN-interface 1.
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] dhcp server netbios-type p-node

dhcp server option

Syntax
In VLAN interface view, use the following commands to customize DHCP options for the current DHCP
interface address pool.
dhcp server option code { ascii ascii-string | hex hex-string&<1-10> | ip-address ip-address&<1-8> }
undo dhcp server option code
In system view, use the following commands to customize DHCP options for multiple DHCP interface
address pools.
dhcp server option code { ascii ascii-string | hex hex-string&<1-10> | ip-address ip-address&<1-8> }
{ interface interface-type interface-number [ to interface-type interface-number ] | all }
undo dhcp server option code { interface interface-type interface-number [ to interface-type
interface-number ] | all }
View
System view, VLAN interface view
Parameters
code: Customized option number ranging from 2 to 254. Note that this argument cannot be 3, 6, 15, 44,
46, 50 through 55, 57 through 61, 66, 67, 82, 150, 184, or 217.
ascii ascii-string: Specifies a string that is of 1 to 63 characters. Note that each character of the string
must be an ASCII character.
hex hex-string&<1-10>: Specifies strings, each of which comprises 1 to 8 hexadecimal digits. &<1-10>
means you can provide up to 10 such strings. When inputting more than one string, separate two
neighboring strings with a space. The device currently supports total 64 hex digits, not including spaces.
ip-address ip-address&<1-8>: Specifies IP addresses. &<1-8> means you can provide up to eight IP
addresses. When inputting more than one IP address, separate two neighboring IP addresses with a
space.
interface interface-type interface-number [ to interface-type interface-number ]: Specifies the
interface(s), through which you can specify the corresponding DHCP interface address pools. The
1-15