H3C s3100 series Command Manual page 1012

Sent packets:
Total: 331
urgent packets: 0
control packets: 5 (including 0 RST)
window probe packets: 0, window update
packets: 0
data packets: 306 (6135 bytes) data packets
retransmitted: 0 (0 bytes)
ACK only packets: 20 (14 delayed)
Retransmitted timeout
connections dropped in retransmitted timeout
Keepalive timeout
Keepalive probe
Keepalive timeout, so connections disconnected
Initiated connections
accepted connections
established connections
Closed connections
dropped
initiated dropped
display tcp ipv6 status
Syntax
display tcp ipv6 status
View
Any view
Parameters
None
Description
Use the display tcp ipv6 status command to display the IPv6 TCP connection status, including IP
address of the IPv6 TCP control block, local and peer IPv6 addresses, and status of the IPv6 TCP
connection.
Field
1-23
Description
Statistics of sent packets, including:
Total number of packets
Number of packets containing an urgent
indicator
Number of control packets
Number of window probe packets
Number of window update packets
Number of data packets
Number of retransmitted packets
Number of ACK only packets
Number of packets whose retransmission times
out
Number of connections dropped because of
retransmission timeout
Number of keepalive timeouts
Number of keepalive probes
Number of connections dropped because of
keepalive response timeout
Number of initiated connections
Number of accepted connections
Number of established connections
Number of closed connections
Number of dropped connections (after receiving
SYN from the peer)
Number of connection failures (before receiving
SYN from the peer)