H3C s3100 series Command Manual page 1010

Received packets:
Total: 126
checksum error:
too short: 0
bad code: 0
unreached:
too big: 0
hopcount exceeded: 0
reassembly timeout: 0
parameter problem: 0
unknown error type: 0
echoed: 17
echo replied:
neighbor solicit: 34
neighbor advert: 35
router solicit:
router advert:
redirected: 0
router renumbering: 0
unknown info type: 0
Deliver failed:
bad length:
ratelimited:
display tcp ipv6 statistics
Syntax
display tcp ipv6 statistics
View
Any view
Parameters
None
Description
Use the display tcp ipv6 statistics command to display statistics of IPv6 TCP packets.
You can use the reset tcp ipv6 statistics command to clear statistics of all IPv6 TCP packets.
Examples
# View the statistics of received and sent IPv6 TCP packets.
<Sysname> display tcp ipv6 statistics
Received packets:
Total: 436
Field
0
10
30
0
0
0
0
Description
Statistics of received ICMPv6 packets, including:
Total number of received packets
Number of packets with checksum errors
Number of too small packets
Number of packets with error codes
Number of packets whose destination is unreachable
Number of too large packets
Number of packets exceeding the hop limit
Number of packets whose fragmentation and
reassembly time out
Number of packets with parameter errors
Number of packets with unknown errors
Number of request packets
Number of response packets
Number of neighbor solicitation messages
Number of neighbor advertisement packets
Number of router solicitation packets
Number of router advertisement packets
Number of redirected packets
Number of packets recounted by the router
Number of unknown information type of packets
Number of packets with a incorrect size
Number of packets failing to be received because of
rate limitation
1-21