Name - H3C s3100 series Command Manual

Description
Use the interface Vlan-interface command to create the VLAN interface for a VLAN and enter VLAN
interface view.
Use the undo interface Vlan-interface command to delete a VLAN interface.
You can create a VLAN interface only for an existing VLAN and must ensure that the ID of the VLAN
interface is the same as the VLAN ID.
You can use the ip address command in VLAN interface view (refer to the IP Address and Performance
Command part for the command description) to configure an IP address for this VLAN interface to
enable it to route packets for the devices in the corresponding VLAN.
Related commands: display interface Vlan-interface.
An S3100 series switch can be configured with a single VLAN interface only, and the VLAN must be the
management VLAN. For details about the management VLAN, refer to the "Management VLAN
Configuration" part of this manual.
Examples
# Create the VLAN interface for VLAN 1 and enter VLAN-interface 1 view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1]

name

Syntax
name text
undo name
View
VLAN view
Parameters
text: VLAN name, a description of 1 to 32 characters. It can contain special characters and spaces.
Description
Use the name command to assign a name to the current VLAN.
Use the undo name command to restore the default VLAN name.
When 802.1x or MAC address authentication is configured on the switch, a RADIUS server may be
used to deploy VLANs (either named or numbered) on the ports that have passed authentication. If a
1-5