Mac-Address Security - H3C s3100 series Command Manual

Max mac-address num is 4
Stored mac-address num is 0
Authorization is ignore

mac-address security

Syntax
In system view:
mac-address security mac-address interface interface-type interface-number vlan vlan-id
undo mac-address security [ [ mac-address [ interface interface-type interface-number ] ] vlan
vlan-id ]
In Ethernet port view:
mac-address security mac-address vlan vlan-id
undo mac-address security [ [ mac-address ] vlan vlan-id ]
View
System view, Ethernet port view
Parameters
mac-address: Security MAC address, in the H-H-H format.
interface interface-type interface-number: Specify the port on which the security MAC address is to be
added. The interface-type interface-number arguments indicate the port type and port number.
vlan vlan-id: Specify the VLAN to which the MAC address belongs. The vlan-id argument specifies a
VLAN ID in the range 1 to 4094.
Description
Use the mac-address security command to create a security MAC address entry.
Use the undo mac-address security command to remove a security MAC address.
By default, no security MAC address entry is configured.
The mac-address security command can be configured successfully only when port security is
enabled and the security mode is autolearn.
To create a security MAC address entry successfully, you must make sure that the specified VLAN
is carried on the specified port.
Field
1-5
Description
The maximum number of MAC addresses
allowed on the port is 4.
No MAC address is stored.
Authorization information delivered by the
Remote Authentication Dial-In User Service
(RADIUS) server will not be applied to the port.