Multicast Static-Group Interface; Multicast Static-Group Vlan - H3C s3100 series Command Manual

multicast static-group interface

Syntax
multicast static-group group-address interface interface-list
undo multicast static-group group-address interface interface-list
View
VLAN interface view
Parameters
group-address: IP address of the multicast group to join, in the range of 224.0.0.0 to 239.255.255.255.
interface interface-list: Specifies a port list. With the interface-list argument, you can define one or more
individual ports (in the form of interface-type interface-number) and/or one or more port ranges (in the
form of interface-type interface-number1 to interface-type interface-number2, where interface-number2
must be greater than interface-number1). The total number of individual ports plus port ranges cannot
exceed 10. For port types and port numbers, refer to the parameter description in the "Port Basic
Configuration" part in this manual.
Description
Use the multicast static-group interface command to configure the specified port(s) under the current
VLAN interface as static member port(s) for the specified multicast group.
Use the undo multicast static-group interface command to remove the specified port(s) in the
current VLAN as static member port(s) for the specified multicast group.
By default, no port is configured as a static multicast group member port.
Examples
# Configure ports Ethernet 1/0/1 to Ethernet 1/0/3 under VLAN-interface 1 as static members ports for
multicast group 225.0.0.1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] multicast static-group 225.0.0.1 interface Ethernet 1/0/1 to
Ethernet 1/0/3

multicast static-group vlan

Syntax
multicast static-group group-address vlan vlan-id
undo multicast static-group group-address vlan vlan-id
View
Ethernet port view
Parameters
group-address: IP address of the multicast group to join, in the range of 224.0.0.0 to 239.255.255.255.
1-17