H3C s3100 series Command Manual page 703

View
Cluster view
Parameters
None
Description
Use the topology save-to command to save the standard topology of the cluster to the local Flash
memory.
The file name used to save the standard topology is topology.top. Do not modify the file name.
This command is applicable to only the management device of a cluster.
Related commands: topology restore-from.
Examples
# Enter Cluster view.
<aaa_0.Sysname>system-view
System View: return to User View with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster]
# Save the standard topology of the cluster to the local Flash.
[aaa_0.Sysname-cluster] topology save-to local-flash
Base topology backup to file OK
2-47