Cluster-Mac Syn-Interval; Delete-Member - H3C s3100 series Command Manual

System View: return to User View with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] cluster-mac 0180-C200-0028

cluster-mac syn-interval

Syntax
cluster-mac syn-interval time-interval
View
Cluster view
Parameters
time-interval: Interval to send multicast MAC synchronization packets, ranging from 0 to 30 minutes.
Description
Use the cluster-mac syn-interval command to set the interval for the management device to send
HGMP V2 multicast MAC synchronization packets periodically. You can only use this command on a
management device.
By default, this interval is one minute.
HGMPv2 multicast MAC synchronization packets are used for synchronizing the HGMPv2 multicast
MAC address configuration (configured through the cluster-mac command) between devices in a
cluster, so that HGMPv2 protocol packets can be forwarded normally within the cluster. HGMPv2
multicast MAC synchronization packets are Layer 2 multicast packets.
If you set this interval to zero on a management device, the management device will not send HGMP V2
multicast MAC synchronization packets to other devices.
Related commands: cluster-mac.
Examples
# Set the interval for the management device to send HGMP V2 multicast MAC synchronization packets
to one minute.
<aaa_0.Sysname> system-view
System View: return to User View with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] cluster-mac syn-interval 1

delete-member

Syntax
delete-member member-id [ to-black-list ]
View
Cluster view
Parameters
member-id: Member number of a member device, ranging from 1 to 255.
2-22