Reset Dot1X Statistics - H3C s3100 series Command Manual

Description
Use the dot1x version-check command to enable 802.1x client version checking for specified Ethernet
ports.
Use the undo dot1x version-check command to disable 802.1x client version checking for specified
Ethernet ports.
By default, 802.1x client version checking is disabled on all the Ethernet ports.
In system view:
If you do not provide the interface-list argument, these two commands apply to all the ports of the
switch.
If you specify the interface-list argument, these commands apply to the specified ports.
In Ethernet port view, the interface-list argument is not available and the commands apply to only the
current Ethernet port.
Example
# Configure Ethernet 1/0/1 port to check the version of the 802.1x client upon receiving authentication
packets.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x version-check

reset dot1x statistics

Syntax
reset dot1x statistics [ interface interface-list ]
View
User view
Parameter
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string "&<1-10>" means that up to 10 port lists
can be provided.
Description
Use the reset dot1x statistics command to clear 802.1x-related statistics.
To retrieve the latest 802.1x-related statistics, you can use this command to clear the existing
802.1x-related statistics first.
When you execute this command,
If the interface-list argument is not specified, this command clears the global 802.1x statistics and the
802.1x statistics on all the ports.
If the interface-list argument is specified, this command clears the 802.1x statistics on the specified
ports.
1-21