Display Ssh User-Information - H3C s3100 series Command Manual

If an SSH client needs to authenticate the SSH server, it uses the locally saved public key of the server
for authentication. In case the authentication fails, you can use the display ssh server-info command
to view whether the locally saved public key of the server is correct.
Related commands: ssh client assign, ssh client first-time enable.
Examples
# Display the mappings between SSH servers and their public keys saved on the client.
<Sysname> display ssh server-info
Server Name(IP)
_________________________________________________________________________
192.168.0.90

display ssh user-information

Syntax
display ssh user-information [ username ]
View
Any view
Parameters
username: SSH user name, a string of 1 to 184 characters. It cannot contain any of these characters:
slash (/), backslash (\), colon (:), asterisk (*), question mark (?), less than sign (<), greater than sign (>),
and the vertical bar sign (|). In addition, the @ sign can appear up to once, the username part (that is,
the string before the @ sign) cannot be more than 55 characters, and the domain name part cannot be
more than 128 characters.
Description
Use the display ssh user-information command on an SSH server to display information about the
current SSH users, including user name, authentication type, corresponding public key name and
authorized service type. If the username argument is specified, the command displays information
about the specified user.
Related commands: ssh authentication-type default, ssh user, ssh user authentication-type, ssh
user assign, ssh user service-type.
Examples
# Display information about the current SSH users.
<Sysname> display ssh user-information
Username
kk
Authentication-type
publickey
1-8
Server public key name
192.168.0.90
User-public-key-name
test
Service-type
sftp