H3C s3100 series Command Manual page 999

Hide thumbs Also See for s3100 series:
Table of Contents

Advertisement

Examples
# Display ND detection configuration.
<Sysname> display ipv6 nd detection
ND detection is enabled in the following VLANs:
2, 10
ND detection trust is configured on the following interfaces:
Interface
Eth1/0/1
Eth1/0/3
Table 1-6 display ipv6 nd detection command output description
ND detection is enabled in the following VLANs:
ND detection trust is configured on the following
interfaces
display ipv6 nd detection statistics
Syntax
display ipv6 nd detection statistics [ interface interface-type interface-number ]
View
Any view
Parameters
interface interface-type interface-number: Displays the statistics of the specified interface.
interface-type interface-number:Specifies the interface type and number
Description
Use the display ipv6 nd detection statistics command to display the statistics of discarded packets
when the ND detection checks the user legality.
Note that: for a specified interface, only displaying the statistics of the packets discarded by that
interface; otherwise, displaying the statistics of packets discarded by all the interfaces.
Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display the statistics of discarded packets when the ND detection checks the user legality.
<Sysname> display ipv6 nd detection statistics
Trusted
yes
yes
Field
The VLAN enabling the ND detection
Lists of ND trust ports
1-10
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents