Send - H3C s3100 series Command Manual

You can use the screen-length 0 command to disable the function to display information in pages.
Examples
# Set the number of lines the terminal screen can contain to 20.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] screen-length 20

send

Syntax
send { all | number | type number }
View
User view
Parameters
all: Sends messages to all user interfaces.
type: User interface type, which can be AUX (for AUX user interface) and VTY (for VTY user interface).
number: User interface index. A user interface index can be relative or absolute.
In relative user interface index scheme, the type argument is required. In this case, AUX user
interfaces are numbered from AUX0 through AUX7; VTY user interfaces are numbered from VTY0
through VTY4.
In absolute user interface index scheme, the type argument is not required. In this case, user
interfaces are numbered from 0 to 12.
Description
Use the send command to send messages to a user interface or all the user interfaces.
Examples
# Send "hello" to all user interfaces.
<Sysname> send all
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
hello^Z
Send message? [Y/N]y
The current user interface will receive the following information:
<Sysname>
***
***
***Message from vty1 to vty1
***
hello
1-17