Display Trapbuffer - H3C s3100 series Command Manual

Parameter
Level severity: Specifies an information severity level. The severity argument ranges from 1 to 8.
Description
Use the display logbuffer summary command to display the statistics of the log buffer.
Example
# Display the summary of the log buffer.
<Sysname> display logbuffer summary
EMERG ALERT CRIT ERROR
0 0
The above information indicates that there are 94 warnings and one informational information in the
log buffer.

display trapbuffer

Syntax
display trapbuffer [ unit unit-id ] [ size buffersize ]
View
Any view
Parameter
unit-id: Unit ID of the device, the value can only be 1.
size buffersize: Specifies the size of the trap buffer (number of messages the buffer holds) you want to
display. The buffersize argument ranges from 1 to 1,024 and defaults to 256.
Description
Use the display trapbuffer command to display the status of the trap buffer and the records in the trap
buffer.
Absence of the size buffersize argument indicates that all trap information is displayed.
Example
# Display the status of the trap buffer and the records in the trap buffer.
<Sysname> display trapbuffer
Trapping Buffer Configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , Channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 6
#Apr 1 23:55:52:263 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -
Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227641, ifAdminStatus is 1, ifOperStatus
is 1
WARN NOTIF
0 0 94 0
INFO DEBUG
1 0
1-5