H3C s3100 series Command Manual page 21

F 0 AUX 0 9600
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
Super: The Super authentication mode of UIs.
A : Authentication use AAA.
N : Current UI need not authentication.
P : Authentication use current UI's password.
S : Authentication use super password.
Table 1-1 Descriptions on the fields of the display user-interface command
Filed
+
F
Idx
Type
Tx/Rx
Modem
Privi
Auth
Int
Super
A
N
P
S
- 3 N -
The user interface is in use.
The user interface operates in asynchronous
mode.
The absolute index of the user interface
User interface type and the relative index
Transmission speed of the user interface
Indicates whether or not a modem is used.
Available command level
Authentication mode
Physical position of the user interface
The authentication mode used for a user to
switch from the current lower user level to a
higher level, including S, A, SA and AS.
S: Super password authentication
A: HWTACACS authentication
SA: Super password authentication is preferred,
with HWTACACS authentication being a backup
AS: HWTACACS authentication is preferred,
with super password authentication being a
backup
For details about the four authentication modes,
refer to the CLI part of the manual.
The current user authentication mode is scheme.
The current user authentication mode is none.
The current user authentication mode is
password.
Super password authentication
1-6
S
Description